Multipath device is rejected and subsequently not created; size discard and domap failed to add paths

部分多路径磁盘无法聚合multipath -v2有如下提示信息

reject: 363c9d56100e06a30eed2649d00000075 undef HUAWEI  ,XSG1            
size=200G features=‘0‘ hwhandler=‘0‘ wp=undef
`-+- policy=‘service-time 0‘ prio=-1 status=undef
  |- 7:0:4:8  sdaq               66:160  undef ready running
  `- 7:0:3:8  sdl                8:176   undef ready running
Aug 25 02:24:55 | sdar: alua not supported
Aug 25 02:24:55 | sdm: alua not supported
reject: 363c9d56100e06a30eed2655600000076 undef HUAWEI  ,XSG1            
size=200G features=‘0‘ hwhandler=‘0‘ wp=undef
`-+- policy=‘service-time 0‘ prio=-1 status=undef
  |- 7:0:4:9  sdar               66:176  undef ready running
  `- 7:0:3:9  sdm                8:192   undef ready running

Multipath device is rejected and subsequently not created; size discard and domap failed to add paths

https://access.redhat.com/solutions/4919741)

环境

• Red Hat Enterprise Linux 5
• Red Hat Enterprise Linux 6
• Red Hat Enterprise Linux 7
• Device-mapper-multipath

问题

• Multipath does not create a multipath device when the native mpio and SAN configuration is such that a device should be created.

决议

Rescan scsi devices, or delete and rescan scsi devices, or a reboot of the system should resolve this problem:

# echo 1 > /sys/block/sdX/device/rescan
or
# echo 1 > /sys/block/sdX/device/delete
# rescan-scsi-bus.sh -a        <<<-------requires sg3_utils to be installed

Rescan for multipath devices:

  # multipath v2
  # multipath -ll

Verify the previously rejected multipath device has now been created.

根源

The sd device(s) in sysfs contains stale size attributes, resulting in attributes that do not match the other sd devices associated with the LUN. When multipath checks the sd devices associated with a SAN LUN, and it detects size inconsistencies, it will discard the sd devices associated with the LUN, reject the LUN, and generate domap failed logs for the underlying sd devices.

From the code:

               for (i = k + 1; i < VECTOR_SIZE(pathvec); i++) {
                        pp2 = VECTOR_SLOT(pathvec, i);

                        if (strcmp(pp1->wwid, pp2->wwid))
                                continue;

                        if (!pp2->size)
                                continue;

                        if (pp2->size != mpp->size) {
                                /*
                                 * ouch, avoid feeding that to the DM
                                 */
                                condlog(0, "%s: size %llu, expected %llu. "
                                        "Discard", pp2->dev_t, pp2->size,
                                        mpp->size);
                                mpp->action = ACT_REJECT;
                        }
                        if (pp2->priority == PRIO_UNDEF)
                                mpp->action = ACT_REJECT;
                }

诊断步骤

Check for reject and discards in the multipath output:

# multipath -v2
Mar 23 11:56:17 | 8:16: size 16780800, expected 134219520. Discard
Mar 23 11:56:17 | 8:26: size 16780800, expected 134219520. Discard
Mar 23 11:56:17 | 8:114: size 16780800, expected 134219520. Discard
Mar 23 11:56:17 | DM message failed [queue_if_no_path]
reject: mpathab (360000000000012345678901234567890) undef EMC     ,SYMMETRIX

If you look at the -v4 output, or check the size attributes in sysfs, at least one of the devices reports a size that does not match the others:

# multipath -v4
[...]
Mar 23 15:51:20 | sdab: size = 16780800
Mar 23 15:51:20 | sdbd: size = 134219520  <<<---
Mar 23 15:51:20 | sdca: size = 16780800
Mar 23 15:51:20 | sddi: size = 16780800

and

# for i in ab bd ca di; do cat /sys/block/sd$i/size; done
16780800
134219520  <<<---
16780800
16780800

Multipath device is rejected and subsequently not created; size discard and domap failed to add paths

原文：https://www.cnblogs.com/my-show-time/p/15187610.html