[root@localhost bond]# ./build/app/bond_app
EAL: Detected 128 lcore(s)
EAL: Detected 4 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode ‘VA‘
EAL: No available hugepages reported in hugepages-2048kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 19e5:200 net_hinic
EAL:   using IOMMU type 1 (Type 1)
net_hinic: Initializing pf hinic-0000:05:00.0 in primary process
net_hinic: Device 0000:05:00.0 hwif attribute:
net_hinic: func_idx:0, p2p_idx:0, pciintf_idx:0, vf_in_pf:0, ppf_idx:0, global_vf_id:15, func_type:2
net_hinic: num_aeqs:4, num_ceqs:4, num_irqs:32, dma_attr:2
net_hinic: Get public resource capability:
net_hinic: host_id: 0x0, ep_id: 0x0, intr_type: 0x0, max_cos_id: 0x7, er_id: 0x0, port_id: 0x0
net_hinic: host_total_function: 0xf2, host_oq_id_mask_val: 0x8, max_vf: 0x78
net_hinic: pf_num: 0x2, pf_id_start: 0x0, vf_num: 0xf0, vf_id_start: 0x10
net_hinic: Get share resource capability:
net_hinic: host_pctxs: 0x0, host_cctxs: 0x0, host_scqs: 0x0, host_srqs: 0x0, host_mpts: 0x0
net_hinic: Get l2nic resource capability:
net_hinic: max_sqs: 0x10, max_rqs: 0x10, vf_max_sqs: 0x4, vf_max_rqs: 0x4
net_hinic: Initialize 0000:05:00.0 in primary successfully
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL:   probe driver: 19e5:200 net_hinic
net_hinic: Initializing pf hinic-0000:06:00.0 in primary process
net_hinic: Device 0000:06:00.0 hwif attribute:
net_hinic: func_idx:1, p2p_idx:1, pciintf_idx:0, vf_in_pf:0, ppf_idx:0, global_vf_id:135, func_type:0
net_hinic: num_aeqs:4, num_ceqs:4, num_irqs:32, dma_attr:2
net_hinic: Get public resource capability:
net_hinic: host_id: 0x0, ep_id: 0x1, intr_type: 0x0, max_cos_id: 0x7, er_id: 0x1, port_id: 0x1
net_hinic: host_total_function: 0xf2, host_oq_id_mask_val: 0x8, max_vf: 0x78
net_hinic: pf_num: 0x2, pf_id_start: 0x0, vf_num: 0xf0, vf_id_start: 0x10
net_hinic: Get l2nic resource capability:
net_hinic: max_sqs: 0x10, max_rqs: 0x10, vf_max_sqs: 0x4, vf_max_rqs: 0x4
net_hinic: Initialize 0000:06:00.0 in primary successfully
EAL: PCI device 0000:7d:00.0 on NUMA socket 0
EAL:   probe driver: 19e5:a222 net_hns3
EAL: PCI device 0000:7d:00.1 on NUMA socket 0
EAL:   probe driver: 19e5:a221 net_hns3
EAL: PCI device 0000:7d:00.2 on NUMA socket 0
EAL:   probe driver: 19e5:a222 net_hns3
EAL: PCI device 0000:7d:00.3 on NUMA socket 0
EAL:   probe driver: 19e5:a221 net_hns3
User device list:
Port 0 modified RSS hash function based on hardware support,requested:0xa38c configured:0x830c
net_hinic: Disable vlan filter succeed, device: hinic-0000:05:00.0, port_id: 0
net_hinic: Disable vlan strip succeed, device: hinic-0000:05:00.0, port_id: 0
net_hinic: Set new mac address 44:a1:91:a4:9c:0b

net_hinic: Disable promiscuous, nic_dev: hinic-0000:05:00.0, port_id: 0, promisc: 0
net_hinic: Disable allmulticast succeed, nic_dev: hinic-0000:05:00.0, port_id: 0
Port 0 MAC: 44:a1:91:a4:9c:0b
Port 1 modified RSS hash function based on hardware support,requested:0xa38c configured:0x830c
net_hinic: Disable vlan filter succeed, device: hinic-0000:06:00.0, port_id: 1
net_hinic: Disable vlan strip succeed, device: hinic-0000:06:00.0, port_id: 1
net_hinic: Set new mac address 44:a1:91:a4:9c:0c

net_hinic: Disable promiscuous, nic_dev: hinic-0000:06:00.0, port_id: 1, promisc: 0
net_hinic: Disable allmulticast succeed, nic_dev: hinic-0000:06:00.0, port_id: 1
Port 1 MAC: 44:a1:91:a4:9c:0c
before create rte_eth_dev_count_avail is 2 
 after create rte_eth_dev_count_avail is 3 
net_hinic: Set new mac address 44:a1:91:a4:9c:0b

net_hinic: Set new mac address 44:a1:91:a4:9c:0b

net_hinic: Set new mac address 44:a1:91:a4:9c:0c

net_hinic: Set port mtu, port_id: 0, mtu: 1500, max_pkt_len: 1518
net_hinic: Disable vlan filter succeed, device: hinic-0000:05:00.0, port_id: 0
net_hinic: Disable vlan strip succeed, device: hinic-0000:05:00.0, port_id: 0
net_hinic: Set new mac address 44:a1:91:a4:9c:0b

net_hinic: Disable promiscuous, nic_dev: hinic-0000:05:00.0, port_id: 0, promisc: 0
net_hinic: Disable allmulticast succeed, nic_dev: hinic-0000:05:00.0, port_id: 0
net_hinic: Set port mtu, port_id: 1, mtu: 1500, max_pkt_len: 1518
net_hinic: Disable vlan filter succeed, device: hinic-0000:06:00.0, port_id: 1
net_hinic: Disable vlan strip succeed, device: hinic-0000:06:00.0, port_id: 1
net_hinic: Set new mac address 44:a1:91:a4:9c:0c

net_hinic: Disable promiscuous, nic_dev: hinic-0000:06:00.0, port_id: 1, promisc: 0
net_hinic: Disable allmulticast succeed, nic_dev: hinic-0000:06:00.0, port_id: 1
net_hinic: Set new mac address 44:a1:91:a4:9c:0b

net_hinic: Set new mac address 44:a1:91:a4:9c:0c

Waiting for slaves to become active...net_hinic: Hilink info report after link down
net_hinic: Cable information: Vendor: LUXSHARE-ICT, QSFP, Direct Attach Copper, length: 5m, max_speed: 100Gbps
net_hinic: Link information: antoneg: on
net_hinic: TX_FFE: PRE2=-4; PRE1=0; MAIN=61; POST1=-1; POST1X=0
net_hinic: RX_CTLE: Gain1~3=5 7 7; Boost1~3=5 2 2; Zero1~3=5 1 0; Squelch1~3=2 2 2
net_hinic: PMA ctrl: on, MAC tx enable, MAC rx enable, PMA debug inforeg: 0x0, PMA signal ok reg: 0x1, RF/LF status reg: 0x1
net_hinic: alos: 0, rx_los: 0, PCS block counter reg: 0x1001,PCS link: 0x2, MAC link: 0x2 PCS_err_cnt: 0x0
net_hinic: Hilink info report after link down
net_hinic: Cable information: Vendor: LUXSHARE-ICT, QSFP, Direct Attach Copper, length: 5m, max_speed: 100Gbps
net_hinic: Link information: antoneg: on
net_hinic: TX_FFE: PRE2=-4; PRE1=0; MAIN=61; POST1=-1; POST1X=0
net_hinic: RX_CTLE: Gain1~3=4 7 7; Boost1~3=4 2 2; Zero1~3=5 1 0; Squelch1~3=2 2 2
net_hinic: PMA ctrl: on, MAC tx enable, MAC rx disable, PMA debug inforeg: 0x0, PMA signal ok reg: 0x1, RF/LF status reg: 0x1
net_hinic: alos: 0, rx_los: 0, PCS block counter reg: 0x1001,PCS link: 0x2, MAC link: 0x2 PCS_err_cnt: 0x0
......net_hinic: Link status event report, dev_name: 0000:05:00.0, port_id: 0, link_status: UP
net_hinic: Set new mac address 44:a1:91:a4:9c:0b

net_hinic: Set new mac address 44:a1:91:a4:9c:0c

net_hinic: Link status event report, dev_name: 0000:06:00.0, port_id: 1, link_status: UP
net_hinic: Hilink info report after link up
net_hinic: Cable information: Vendor: LUXSHARE-ICT, QSFP, Direct Attach Copper, length: 5m, max_speed: 100Gbps
net_hinic: Link information: speed 40Gbps, BASE-FEC, autoneg on
net_hinic: TX_FFE: PRE2=-4; PRE1=0; MAIN=61; POST1=-1; POST1X=0
net_hinic: RX_CTLE: Gain1~3=5 7 7; Boost1~3=4 2 2; Zero1~3=5 1 0; Squelch1~3=2 2 2
net_hinic: Hilink info report after link up
net_hinic: Cable information: Vendor: LUXSHARE-ICT, QSFP, Direct Attach Copper, length: 5m, max_speed: 100Gbps
net_hinic: Link information: speed 40Gbps, BASE-FEC, autoneg on
net_hinic: TX_FFE: PRE2=-4; PRE1=0; MAIN=61; POST1=-1; POST1X=0
net_hinic: RX_CTLE: Gain1~3=5 7 7; Boost1~3=3 2 2; Zero1~3=5 1 0; Squelch1~3=2 2 2
...
net_hinic: Enable promiscuous, nic_dev: hinic-0000:05:00.0, port_id: 0, promisc: 0
Port 2 MAC: 44:a1:91:a4:9c:0b
Starting lcore_main on core 1:0 Our IP:7.0.0.10
bond6>

before create rte_eth_dev_count_avail is 2 
after create rte_eth_dev_count_avail is 3