查看当前系统的硬盘
执行:lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 100G 0 disk └─sda1 8:1 0 100G 0 part / sdb 8:16 0 8G 0 disk [SWAP] sdc 8:32 0 2T 0 disk
其中sdc为需要挂载的硬盘，即/dev/sdc
GNU Parted 3.1 Using /dev/sdc Welcome to GNU Parted! Type ‘help‘ to view a list of commands. (parted) mktable //这里输入mktable New disk label type? gpt //输入gpt (parted) mkpart Partition name? []? primary //设置为primary File system type? [ext2]? ext4 //ext4格式 Start? 0 //从0 End? 2T //到2T Warning: The resulting partition is not properly aligned for best performance. Ignore/Cancel? i //i，忽略 (parted) p //打印分区后的信息 Model: QEMU QEMU HARDDISK (scsi) Disk /dev/sdc: 2147GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 17.4kB 2147GB 2147GB primary
至此已经分区完成，下面开始格式化磁盘
mke2fs 1.42.9 (28-Dec-2013) /dev/sdc is entire device, not just one partition! Proceed anyway? (y,n) y
#创建挂载目录
mkdir /data
#执行挂载 mount /dev/sdc /data
#设置自动挂载，机器重启时候会加载
sudo echo "/dev/sdc /data ext4 auto 0 1" >> /etc/fstab #执行如下命令则会读取/etc/fstab里面的命令
mount -a
博主：测试生财
座右铭：专注测试与自动化，致力提高研发效能；通过测试精进完成原始积累，通过读书理财奔向财务自由。
csdn：https://blog.csdn.net/ccgshigao
原文：https://www.cnblogs.com/qa-freeroad/p/13776800.html