驱动开发常用cmd命令（驱动安装，配置调试环境）

1.关闭强制驱动程序签名

bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

2.开启系统测试模式

bcdedit /set testsigning on

3.安装驱动

sc create TestDriver binpath= "c:\windows\system32\drivers\TestDriver.sys" type= kernel start= demand

type= {own | share | kernel | filesys | rec | adapt | interacttype= {own | share}}

start= {boot | system | auto | demand | disabled}

sc start TestDriver

sc stop TestDriver

4.配置虚拟机调试

bcdedit /bootdebug on

bcdedit /debug on

bcdedit /dbgsettings NET HOSTIP:ip PORT:port [KEY:key] [nodhcp] [newkey] [/start startpolicy] [/noumex]

bcdedit /dbgsettings LOCAL [/start startpolicy] [/noumex]

bcdedit /dbgsettings SERIAL [DEBUGPORT:port] [BAUDRATE:baud] [/start startpolicy] [/noumex]

bcdedit /dbgsettings USB [TARGETNAME:targetname] [/start startpolicy] [/noumex]

bcdedit /dbgsettings 1394 [CHANNEL:channel] [/start startpolicy] [/noumex] NOTE: The 1394 TRANSPORT IS DEPRECATED

例子:

bcdedit /dbgsettings serial debugport:1 baudrate:115200

bcdedit /dbgsettings usb targetname:myTarget

bcdedit /dbgsettings net hostip:10.125.5.10 port:50000

bcdedit /dbgsettings NET HOSTIPV6:2001:48:d8:2f:5e:c0:42:28:4f5b PORT:50000

windbg -k com:pipe,port=\\.\pipe\com_1,resets=0,reconnect

驱动开发常用cmd命令（驱动安装，配置调试环境）

原文：https://www.cnblogs.com/hanawasakuraki/p/13768969.html