首页 > 其他 > 详细

BMW ICOM WLAN configuration

时间:2020-07-08 15:23:59      阅读:64      评论:0      收藏:0      [点我收藏+]

Only 5 steps to configure BMW icom next WLAN to enable wifi connection, here you go:

1. Open ITool Radar to identify ICOM information

技术分享图片

 

2. Open IE and enter the ICOM configuration URL: (ICOM’s IP address is subject to actual reading) http://169.254.33.45:58000/

技术分享图片

 

3.Select WLAN Settings, and press the available WIFI information corresponding to the input, after confirming that it is correct, click Save Changes to save the settings

技术分享图片

 

4. Disconnect the network cable and power off to restart ICOM. After ICOM starts, it will automatically connect to WIFI.

5.  If using BWM ICOM software and USB-WIFI, the configuration information is Mode: 802.11n, 2.4GHz SSID:ISAP Security Type: WPA2 Personal Pre- shared Key: BmwAp24h

BMW ICOM WLAN configuration

原文:https://www.cnblogs.com/autolobd2/p/13266878.html

(0)
(0)
   
举报
评论 一句话评论(0
关于我们 - 联系我们 - 留言反馈 - 联系我们:wmxa8@hotmail.com
© 2014 bubuko.com 版权所有
打开技术之扣,分享程序人生!