原文链接：https://mp.weixin.qq.com/s/Hyf0OD7KPeoBJw8gxTQsYA
| 主机名 | IP | 备注 |
|---|---|---|
| k8s-master1 | 192.168.0.216 | Master1,etcd1,node节点 |
| k8s-master2 | 192.168.0.217 | Master2,etcd2,node节点 |
| k8s-master3 | 192.168.0.218 | Master3,etcd3,node节点 |
| slb | lb.ypvip.com.cn | 外网阿里slb域名 |
本环境使用阿里云，API Server 高可用通过阿里云SLB实现，如果环境不在云上，可以通过 Nginx + Keepalived，或者 HaProxy + Keepalived等实现。
阿里slb设置TCP监听，监听6443端口(通过四层负载到master apiserver)。阿里云ECS主机使用 CentOS 7.6.1810 版本，并且内核都升到5.x版本。Iptables 模式（kube-proxy 注释中预留 Ipvs 模式配置）IPIP 模式svc.cluster.local10.10.0.1 为集群 kubernetes svc 解析ip$ kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.10.0.1 <none> 443/TCP 6d23h
| 名称 | IP网段 | 备注 |
|---|---|---|
| service-cluster-ip | 10.10.0.0/16 | 可用地址 65534 |
| pods-ip | 10.20.0.0/16 | 可用地址 65534 |
| 集群dns | 10.10.0.2 | 用于集群service域名解析 |
| k8s svc | 10.10.0.1 | 集群 kubernetes svc 解析ip |
所有集群节点都需要初始化
2.1 停止所有机器 firewalld 防火墙
$ systemctl stop firewalld $ systemctl disable firewalld
2.2 关闭 swap
$ swapoff -a $ sed -i ‘s/.*swap.*/#&/‘ /etc/fstab
2.3 关闭 Selinux
$ setenforce 0 $ sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux $ sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config $ sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/sysconfig/selinux $ sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/selinux/config
2.4 设置主机名、升级内核、安装 Docker ce
运行下面 init.sh shell 脚本，脚本完成下面四项任务：
hostnamek8s依赖环境升级系统内核（升级Centos7系统内核，解决Docker-ce版本兼容问题）docker ce 19.03.6 版本在每台机器上运行 init.sh 脚本，示例如下：
Ps：init.sh 脚本只用于 Centos，支持 重复运行。
# k8s-master1 机器运行，init.sh 后面接的参数是设置 k8s-master1 服务器主机名 $ chmod +x init.sh && ./init.sh k8s-master1 # 执行完 init.sh 脚本，请重启服务器 $ reboot
#!/usr/bin/bash
function Check_linux_system(){
linux_version=`cat /etc/redhat-release`
if [[ ${linux_version} =~ "CentOS" ]];then
echo -e "\033[32;32m 系统为 ${linux_version} \033[0m \n"
else
echo -e "\033[32;32m 系统不是CentOS,该脚本只支持CentOS环境\033[0m \n"
exit 1
fi
}
function Set_hostname(){
if [ -n "$HostName" ];then
grep $HostName /etc/hostname && echo -e "\033[32;32m 主机名已设置，退出设置主机名步骤 \033[0m \n" && return
case $HostName in
help)
echo -e "\033[32;32m bash init.sh 主机名 \033[0m \n"
exit 1
;;
*)
hostname $HostName
echo "$HostName" > /etc/hostname
echo "`ifconfig eth0 | grep inet | awk ‘{print $2}‘` $HostName" >> /etc/hosts
;;
esac
else
echo -e "\033[32;32m 输入为空，请参照 bash init.sh 主机名 \033[0m \n"
exit 1
fi
}
function Install_depend_environment(){
rpm -qa | grep nfs-utils &> /dev/null && echo -e "\033[32;32m 已完成依赖环境安装，退出依赖环境安装步骤 \033[0m \n" && return
yum install -y nfs-utils curl yum-utils device-mapper-persistent-data lvm2 net-tools conntrack-tools wget vim ntpdate libseccomp libtool-ltdl telnet
echo -e "\033[32;32m 升级Centos7系统内核到5版本，解决Docker-ce版本兼容问题\033[0m \n"
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org && rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm && yum --disablerepo=\* --enablerepo=elrepo-kernel repolist && yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-ml.x86_64 && yum remove -y kernel-tools-libs.x86_64 kernel-tools.x86_64 && yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-ml-tools.x86_64 && grub2-set-default 0
modprobe br_netfilter
cat <<EOF > /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF
sysctl -p /etc/sysctl.d/k8s.conf
ls /proc/sys/net/bridge
}
function Install_docker(){
rpm -qa | grep docker && echo -e "\033[32;32m 已安装docker，退出安装docker步骤 \033[0m \n" && return
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum makecache fast
yum -y install docker-ce-19.03.6 docker-ce-cli-19.03.6
# 设置 iptables file表中 FORWARD 默认链规则为 ACCEPT
sed -i ‘/ExecStart=/i ExecStartPost=\/sbin\/iptables -P FORWARD ACCEPT‘ /usr/lib/systemd/system/docker.service
systemctl enable docker.service
systemctl start docker.service
systemctl stop docker.service
echo ‘{"registry-mirrors": ["https://4xr1qpsp.mirror.aliyuncs.com"], "log-opts": {"max-size":"500m", "max-file":"3"}}‘ > /etc/docker/daemon.json
systemctl daemon-reload
systemctl start docker
}
# 初始化顺序
HostName=$1
Check_linux_system && Set_hostname && Install_depend_environment && Install_docker
在 k8s-master1 安装证书生成工具 cfssl，并生成相关证书
# 创建目录用于存放 SSL 证书 $ mkdir /data/ssl -p # 下载生成证书命令 $ wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 $ wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 $ wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 # 添加执行权限 $ chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64 # 移动到 /usr/local/bin 目录下 $ mv cfssl_linux-amd64 /usr/local/bin/cfssl $ mv cfssljson_linux-amd64 /usr/local/bin/cfssljson $ mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo
# 进入证书目录
$ cd /data/ssl/
# 创建 certificate.sh 脚本
$ vim certificate.sh
PS：证书有效期为 10年
cat > ca-config.json <<EOF
{
"signing": {
"default": {
"expiry": "87600h"
},
"profiles": {
"kubernetes": {
"expiry": "87600h",
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
]
}
}
}
}
EOF
cat > ca-csr.json <<EOF
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "Beijing",
"ST": "Beijing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
#-----------------------
cat > server-csr.json <<EOF
{
"CN": "kubernetes",
"hosts": [
"127.0.0.1",
"192.168.0.216",
"192.168.0.217",
"192.168.0.218",
"10.10.0.1",
"lb.ypvip.com.cn",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server
#-----------------------
cat > admin-csr.json <<EOF
{
"CN": "admin",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "system:masters",
"OU": "System"
}
]
}
EOF
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
#-----------------------
cat > kube-proxy-csr.json <<EOF
{
"CN": "system:kube-proxy",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
根据自己环境修改 certificate.sh 脚本
"192.168.0.216", "192.168.0.217", "192.168.0.218", "10.10.0.1", "lb.ypvip.com.cn",
修改完脚本，然后执行
$ bash certificate.sh
k8s-master1 机器上操作，把执行文件copy到 k8s-master2 k8s-master3
二进制包下载地址：https://github.com/etcd-io/etcd/releases/download/v3.4.7/etcd-v3.4.7-linux-amd64.tar.gz
# 创建存储etcd数据目录
$ mkdir /data/etcd/
# 创建 k8s 集群配置目录
$ mkdir /opt/kubernetes/{bin,cfg,ssl} -p
# 下载二进制etcd包，并把执行文件放到 /opt/kubernetes/bin/ 目录
$ cd /data/etcd/
$ wget https://github.com/etcd-io/etcd/releases/download/v3.4.7/etcd-v3.4.7-linux-amd64.tar.gz
$ tar zxvf etcd-v3.4.7-linux-amd64.tar.gz
$ cd etcd-v3.4.7-linux-amd64
$ cp -a etcd etcdctl /opt/kubernetes/bin/
# 把 /opt/kubernetes/bin 目录加入到 PATH
$ echo ‘export PATH=$PATH:/opt/kubernetes/bin‘ >> /etc/profile
$ source /etc/profile
登陆到 k8s-master2 和 k8s-master3 服务器上操作
# 创建 k8s 集群配置目录
$ mkdir /data/etcd
$ mkdir /opt/kubernetes/{bin,cfg,ssl} -p
# 把 /opt/kubernetes/bin 目录加入到 PATH
$ echo ‘export PATH=$PATH:/opt/kubernetes/bin‘ >> /etc/profile
$ source /etc/profile
登陆到 k8s-master1 操作
# 进入 K8S 集群证书目录 $ cd /data/ssl # 把证书 copy 到 k8s-master1 机器 /opt/kubernetes/ssl/ 目录 $ cp ca*pem server*pem /opt/kubernetes/ssl/ # 把etcd执行文件与证书 copy 到 k8s-master2 k8s-master3 机器 scp -r /opt/kubernetes/* root@k8s-master2:/opt/kubernetes scp -r /opt/kubernetes/* root@k8s-master3:/opt/kubernetes
$ cd /data/etcd # 编写 etcd 配置文件脚本 $ vim etcd.sh
#!/bin/bash
ETCD_NAME=${1:-"etcd01"}
ETCD_IP=${2:-"127.0.0.1"}
ETCD_CLUSTER=${3:-"etcd01=https://127.0.0.1:2379"}
cat <<EOF >/opt/kubernetes/cfg/etcd.yml
name: ${ETCD_NAME}
data-dir: /var/lib/etcd/default.etcd
listen-peer-urls: https://${ETCD_IP}:2380
listen-client-urls: https://${ETCD_IP}:2379,https://127.0.0.1:2379
advertise-client-urls: https://${ETCD_IP}:2379
initial-advertise-peer-urls: https://${ETCD_IP}:2380
initial-cluster: ${ETCD_CLUSTER}
initial-cluster-token: etcd-cluster
initial-cluster-state: new
client-transport-security:
cert-file: /opt/kubernetes/ssl/server.pem
key-file: /opt/kubernetes/ssl/server-key.pem
client-cert-auth: false
trusted-ca-file: /opt/kubernetes/ssl/ca.pem
auto-tls: false
peer-transport-security:
cert-file: /opt/kubernetes/ssl/server.pem
key-file: /opt/kubernetes/ssl/server-key.pem
client-cert-auth: false
trusted-ca-file: /opt/kubernetes/ssl/ca.pem
auto-tls: false
debug: false
logger: zap
log-outputs: [stderr]
EOF
cat <<EOF >/usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
Documentation=https://github.com/etcd-io/etcd
Conflicts=etcd.service
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
LimitNOFILE=65536
Restart=on-failure
RestartSec=5s
TimeoutStartSec=0
ExecStart=/opt/kubernetes/bin/etcd --config-file=/opt/kubernetes/cfg/etcd.yml
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable etcd
systemctl restart etcd
# 执行 etcd.sh 生成配置脚本 $ chmod +x etcd.sh $ ./etcd.sh etcd01 192.168.0.216 etcd01=https://192.168.0.216:2380,etcd02=https://192.168.0.217:2380,etcd03=https://192.168.0.218:2380 # 查看 etcd 是否启动正常 $ ps -ef | grep etcd $ netstat -ntplu | grep etcd tcp 0 0 192.168.0.216:2379 0.0.0.0:* LISTEN 1558/etcd tcp 0 0 127.0.0.1:2379 0.0.0.0:* LISTEN 1558/etcd tcp 0 0 192.168.0.216:2380 0.0.0.0:* LISTEN 1558/etcd # 把 etcd.sh 脚本 copy 到 k8s-master2 k8s-master3 机器上 $ scp /data/etcd/etcd.sh root@k8s-master2:/data/etcd/ $ scp /data/etcd/etcd.sh root@k8s-master3:/data/etcd/
登陆到 k8s-master2 操作
# 执行 etcd.sh 生成配置脚本 $ chmod +x etcd.sh $ ./etcd.sh etcd02 192.168.0.217 etcd01=https://192.168.0.216:2380,etcd02=https://192.168.0.217:2380,etcd03=https://192.168.0.218:2380 # 查看 etcd 是否启动正常 $ ps -ef | grep etcd $ netstat -ntplu | grep etcd
登陆到 k8s-master3 操作
# 执行 etcd.sh 生成配置脚本 $ chmod +x etcd.sh $ ./etcd.sh etcd03 192.168.0.218 etcd01=https://192.168.0.216:2380,etcd02=https://192.168.0.217:2380,etcd03=https://192.168.0.218:2380 # 查看 etcd 是否启动正常 $ ps -ef | grep etcd $ netstat -ntplu | grep etcd
# 随便登陆一台master机器，查看 etcd 集群是否正常 $ ETCDCTL_API=3 etcdctl --write-out=table --cacert=/opt/kubernetes/ssl/ca.pem --cert=/opt/kubernetes/ssl/server.pem --key=/opt/kubernetes/ssl/server-key.pem --endpoints=https://192.168.0.216:2379,https://192.168.0.217:2379,https://192.168.0.218:2379 endpoint health +---------------------------------+--------+-------------+-------+ | ENDPOINT | HEALTH | TOOK | ERROR | +---------------------------------+--------+-------------+-------+ | https://192.168.0.216:2379 | true | 38.721248ms | | | https://192.168.0.217:2379 | true | 38.621248ms | | | https://192.168.0.218:2379 | true | 38.821248ms | | +---------------------------------+--------+-------------+-------+
创建 metrics-server 使用的证书
登陆到 k8s-master1 操作
$ cd /data/ssl/
# 注意: "CN": "system:metrics-server" 一定是这个，因为后面授权时用到这个名称，否则会报禁止匿名访问
$ cat > metrics-server-csr.json <<EOF
{
"CN": "system:metrics-server",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "k8s",
"OU": "system"
}
]
}
EOF
生成 metrics-server 证书和私钥
# 生成证书 $ cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem -ca-key=/opt/kubernetes/ssl/ca-key.pem -config=/opt/kubernetes/ssl/ca-config.json -profile=kubernetes metrics-server-csr.json | cfssljson -bare metrics-server # copy 到 /opt/kubernetes/ssl 目录 $ cp metrics-server-key.pem metrics-server.pem /opt/kubernetes/ssl/ # copy 到 k8s-master2 k8s-master3 机器上 $ scp metrics-server-key.pem metrics-server.pem root@k8s-master2:/opt/kubernetes/ssl/ $ scp metrics-server-key.pem metrics-server.pem root@k8s-master3:/opt/kubernetes/ssl/
登陆到 k8s-master1 操作
v1.18 下载页面
https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.18.md
# 创建存放 k8s 二进制包目录 $ mkdir /data/k8s-package $ cd /data/k8s-package # 下载 v1.18.2 二进制包 # 作者把二进制安装包上传到cdn上 https://cdm.yp14.cn/k8s-package/kubernetes-server-v1.18.2-linux-amd64.tar.gz $ wget https://dl.k8s.io/v1.18.2/kubernetes-server-linux-amd64.tar.gz $ tar xf kubernetes-server-linux-amd64.tar.gz
master 节点需要用到：
node 节点需要用到：
PS：本文master节点也做为一个node节点，所以需要用到 kubelet kube-proxy 执行文件
# 进入解压出来二进制包bin目录 $ cd /data/k8s-package/kubernetes/server/bin # cpoy 执行文件到 /opt/kubernetes/bin 目录 $ cp -a kube-apiserver kube-controller-manager kube-scheduler kubectl kubelet kube-proxy /opt/kubernetes/bin # copy 执行文件到 k8s-master2 k8s-master3 机器 /opt/kubernetes/bin 目录 $ scp kube-apiserver kube-controller-manager kube-scheduler kubectl kubelet kube-proxy root@k8s-master2:/opt/kubernetes/bin/ $ scp kube-apiserver kube-controller-manager kube-scheduler kubectl kubelet kube-proxy root@k8s-master3:/opt/kubernetes/bin/
登陆到 k8s-master1 操作
$ cd /data/ssl/ # 修改第10行 KUBE_APISERVER 地址 $ vim kubeconfig.sh
修改 kubeconfig.sh 脚本配置 KUBE_APISERVER 变量时，一定要把 https:// 带上，否则默认使用 http:// 请求
# 创建 TLS Bootstrapping Token
export BOOTSTRAP_TOKEN=$(head -c 16 /dev/urandom | od -An -t x | tr -d ‘ ‘)
cat > token.csv <<EOF
${BOOTSTRAP_TOKEN},kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF
#----------------------
# 创建kubelet bootstrapping kubeconfig
# 一定要把 https:// 带上，否则默认使用 http:// 请求
export KUBE_APISERVER="https://lb.ypvip.com.cn:6443"
# 设置集群参数
kubectl config set-cluster kubernetes --certificate-authority=./ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=bootstrap.kubeconfig
# 设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=bootstrap.kubeconfig
# 设置上下文参数
kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=bootstrap.kubeconfig
# 设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig
#----------------------
# 创建kube-proxy kubeconfig文件
kubectl config set-cluster kubernetes --certificate-authority=./ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=kube-proxy.kubeconfig
kubectl config set-credentials kube-proxy --client-certificate=./kube-proxy.pem --client-key=./kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
# 生成证书 $ sh kubeconfig.sh # 输出下面结果 kubeconfig.sh kube-proxy-csr.json kube-proxy.kubeconfig kube-proxy.csr kube-proxy-key.pem kube-proxy.pem bootstrap.kubeconfig
# copy *kubeconfig 文件到 /opt/kubernetes/cfg 目录 $ cp *kubeconfig /opt/kubernetes/cfg # copy 到 k8s-master2 k8s-master3 机器上 $ scp *kubeconfig root@k8s-master2:/opt/kubernetes/cfg $ scp *kubeconfig root@k8s-master3:/opt/kubernetes/cfg
登陆到 k8s-master1 k8s-master2 k8s-master3 操作
# 创建 /data/k8s-master 目录，用于存放 master 配置执行脚本 $ mkdir /data/k8s-master # 创建 kube-apiserver 日志存放目录 $ mkdir -p /var/log/kubernetes # 创建 kube-apiserver 审计日志文件 $ touch /var/log/kubernetes/k8s-audit.log
登陆到 k8s-master1
$ cd /data/k8s-master # 创建生成 kube-apiserver 配置文件脚本
$ vim apiserver.sh
#!/bin/bash
MASTER_ADDRESS=${1:-"192.168.0.216"}
ETCD_SERVERS=${2:-"http://127.0.0.1:2379"}
cat <<EOF >/opt/kubernetes/cfg/kube-apiserver
KUBE_APISERVER_OPTS="--logtostderr=false \\
--v=2 \\
--log-dir=/var/log/kubernetes \\
--etcd-servers=${ETCD_SERVERS} \\
--bind-address=0.0.0.0 \\
--secure-port=6443 \\
--advertise-address=${MASTER_ADDRESS} \\
--allow-privileged=true \\
--service-cluster-ip-range=10.10.0.0/16 \\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,NodeRestriction \\
--authorization-mode=RBAC,Node \\
--kubelet-https=true \\
--enable-bootstrap-token-auth=true \\
--token-auth-file=/opt/kubernetes/cfg/token.csv \\
--service-node-port-range=30000-50000 \\
--kubelet-client-certificate=/opt/kubernetes/ssl/server.pem \\
--kubelet-client-key=/opt/kubernetes/ssl/server-key.pem \\
--tls-cert-file=/opt/kubernetes/ssl/server.pem \\
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \\
--client-ca-file=/opt/kubernetes/ssl/ca.pem \\
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--etcd-cafile=/opt/kubernetes/ssl/ca.pem \\
--etcd-certfile=/opt/kubernetes/ssl/server.pem \\
--etcd-keyfile=/opt/kubernetes/ssl/server-key.pem \\
--requestheader-client-ca-file=/opt/kubernetes/ssl/ca.pem \\
--requestheader-extra-headers-prefix=X-Remote-Extra- \\
--requestheader-group-headers=X-Remote-Group \\
--requestheader-username-headers=X-Remote-User \\
--proxy-client-cert-file=/opt/kubernetes/ssl/metrics-server.pem \\
--proxy-client-key-file=/opt/kubernetes/ssl/metrics-server-key.pem \\
--runtime-config=api/all=true \\
--audit-log-maxage=30 \\
--audit-log-maxbackup=3 \\
--audit-log-maxsize=100 \\
--audit-log-truncate-enabled=true \\
--audit-log-path=/var/log/kubernetes/k8s-audit.log"
EOF
cat <<EOF >/usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-apiserver
ExecStart=/opt/kubernetes/bin/kube-apiserver \$KUBE_APISERVER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl restart kube-apiserver
# 创建生成 kube-controller-manager 配置文件脚本 $ vim controller-manager.sh
#!/bin/bash
MASTER_ADDRESS=${1:-"127.0.0.1"}
cat <<EOF >/opt/kubernetes/cfg/kube-controller-manager
KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \\
--v=2 \\
--master=${MASTER_ADDRESS}:8080 \\
--leader-elect=true \\
--bind-address=0.0.0.0 \\
--service-cluster-ip-range=10.10.0.0/16 \\
--cluster-name=kubernetes \\
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \\
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--experimental-cluster-signing-duration=87600h0m0s \\
--feature-gates=RotateKubeletServerCertificate=true \\
--feature-gates=RotateKubeletClientCertificate=true \\
--allocate-node-cidrs=true \\
--cluster-cidr=10.20.0.0/16 \\
--root-ca-file=/opt/kubernetes/ssl/ca.pem"
EOF
cat <<EOF >/usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-controller-manager
ExecStart=/opt/kubernetes/bin/kube-controller-manager \$KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl restart kube-controller-manager
# 创建生成 kube-scheduler 配置文件脚本
$ vim scheduler.sh #!/bin/bash MASTER_ADDRESS=${1:-"127.0.0.1"} cat <<EOF >/opt/kubernetes/cfg/kube-scheduler KUBE_SCHEDULER_OPTS="--logtostderr=true \--v=2 \--master=${MASTER_ADDRESS}:8080 \--address=0.0.0.0 \--leader-elect" EOF cat <<EOF >/usr/lib/systemd/system/kube-scheduler.service [Unit] Description=Kubernetes Scheduler Documentation=https://github.com/kubernetes/kubernetes [Service] EnvironmentFile=-/opt/kubernetes/cfg/kube-scheduler ExecStart=/opt/kubernetes/bin/kube-scheduler \$KUBE_SCHEDULER_OPTS Restart=on-failure [Install] WantedBy=multi-user.target EOF systemctl daemon-reload systemctl enable kube-scheduler systemctl restart kube-scheduler
# 添加执行权限 $ chmod +x *.sh $ cp /data/ssl/token.csv /opt/kubernetes/cfg/ # copy token.csv 和 master 配置到 k8s-master2 k8s-master3 机器上 $ scp /data/ssl/token.csv root@k8s-master2:/opt/kubernetes/cfg $ scp /data/ssl/token.csv root@k8s-master3:/opt/kubernetes/cfg $ scp apiserver.sh controller-manager.sh scheduler.sh root@k8s-master2:/data/k8s-master $ scp apiserver.sh controller-manager.sh scheduler.sh root@k8s-master3:/data/k8s-master # 生成 master配置文件并运行 $ ./apiserver.sh 192.168.0.216 https://192.168.0.216:2379,https://192.168.0.217:2379,https://192.168.0.218:2379 $ ./controller-manager.sh 127.0.0.1 $ ./scheduler.sh 127.0.0.1 # 查看master三个服务是否正常运行 $ ps -ef | grep kube $ netstat -ntpl | grep kube-
登陆到 k8s-master2 操作
$ cd /data/k8s-master # 生成 master配置文件并运行 $ ./apiserver.sh 192.168.0.217 https://192.168.0.216:2379,https://192.168.0.217:2379,https://192.168.0.218:2379 $ ./controller-manager.sh 127.0.0.1 $ ./scheduler.sh 127.0.0.1 # 查看master三个服务是否正常运行 $ ps -ef | grep kube $ netstat -ntpl | grep kube-
登陆到 k8s-master3 操作
$ cd /data/k8s-master # 生成 master配置文件并运行 $ ./apiserver.sh 192.168.0.218 https://192.168.0.216:2379,https://192.168.0.217:2379,https://192.168.0.218:2379 $ ./controller-manager.sh 127.0.0.1 $ ./scheduler.sh 127.0.0.1 # 查看master三个服务是否正常运行 $ ps -ef | grep kube $ netstat -ntpl | grep kube-
# 随便登陆一台master查看集群健康状态
$ kubectl get cs
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-2 Healthy {"health":"true"}
etcd-1 Healthy {"health":"true"}
etcd-0 Healthy {"health":"true"}
错误处理
# 查询集群状态报下面错误 $ kubectl get cs error: no configuration has been provided, try setting KUBERNETES_MASTER environment variable
两种解决方法：
KUBERNETES_MASTER Apiserver 地址，不推荐这种方法这里介绍生成管理员 config 配置
# 降级 kubectl 版本到 1.17.5
$ mv /opt/kubernetes/bin/kubectl /opt/kubernetes/bin/kubectl-1.18.2
$ wget https://cdm.yp14.cn/k8s-package/k8s-1.17-bin/kubectl -O /opt/kubernetes/bin/kubectl
$ chmod +x /opt/kubernetes/bin/kubectl
# 创建一个存放用户文件目录
$ mkdir -p /root/yaml/create-user
$ cd /root/yaml/create-user
# Copy 脚本依赖文件
$ cp /data/ssl/ca-config.json /opt/kubernetes/ssl/
# 创建一个生成用户脚本
$ vim create-user-kubeconfig.sh
#!/bin/bash
# 注意修改KUBE_APISERVER为你的API Server的地址
KUBE_APISERVER=$1
USER=$2
USER_SA=system:serviceaccount:default:${USER}
Authorization=$3
USAGE="USAGE: create-user.sh <api_server> <username> <clusterrole authorization>\n
Example: https://lb.ypvip.com.cn:6443 brand"
CSR=`pwd`/user-csr.json
SSL_PATH="/opt/kubernetes/ssl"
USER_SSL_PATH="/root/yaml/create-user"
SSL_FILES=(ca-key.pem ca.pem ca-config.json)
CERT_FILES=(${USER}.csr $USER-key.pem ${USER}.pem)
if [[ $KUBE_APISERVER == "" ]]; then
echo -e $USAGE
exit 1
fi
if [[ $USER == "" ]];then
echo -e $USAGE
exit 1
fi
if [[ $Authorization == "" ]];then
echo -e $USAGE
exit 1
fi
# 创建用户的csr文件
function createCSR(){
cat>$CSR<<EOF
{
"CN": "USER",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
# 替换csr文件中的用户名
sed -i "s/USER/$USER_SA/g" $CSR
}
function ifExist(){
if [ ! -f "$SSL_PATH/$1" ]; then
echo "$SSL_PATH/$1 not found."
exit 1
fi
}
function ifClusterrole(){
kubectl get clusterrole ${Authorization} &> /dev/null
if (( $? !=0 ));then
echo "${Authorization} clusterrole there is no"
exit 1
fi
}
# 判断clusterrole授权是否存在
ifClusterrole
# 判断证书文件是否存在
for f in ${SSL_FILES[@]};
do
echo "Check if ssl file $f exist..."
ifExist $f
echo "OK"
done
echo "Create CSR file..."
createCSR
echo "$CSR created"
echo "Create user‘s certificates and keys..."
cd $USER_SSL_PATH
cfssl gencert -ca=${SSL_PATH}/ca.pem -ca-key=${SSL_PATH}/ca-key.pem -config=${SSL_PATH}/ca-config.json -profile=kubernetes $CSR| cfssljson -bare $USER_SA
# 创建 sa
kubectl create sa ${USER} -n default
# 设置集群参数
kubectl config set-cluster kubernetes --certificate-authority=${SSL_PATH}/ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=${USER}.kubeconfig
# 设置客户端认证参数
kubectl config set-credentials ${USER_SA} --client-certificate=${USER_SSL_PATH}/${USER_SA}.pem --client-key=${USER_SSL_PATH}/${USER_SA}-key.pem --embed-certs=true --kubeconfig=${USER}.kubeconfig
# 设置上下文参数
kubectl config set-context kubernetes --cluster=kubernetes --user=${USER_SA} --namespace=default --kubeconfig=${USER}.kubeconfig
# 设置默认上下文
kubectl config use-context kubernetes --kubeconfig=${USER}.kubeconfig
# 创建 namespace
# kubectl create ns $USER
# 绑定角色
# kubectl create rolebinding ${USER}-admin-binding --clusterrole=admin --user=$USER --namespace=$USER --serviceaccount=$USER:default
kubectl create clusterrolebinding ${USER}-binding --clusterrole=${Authorization} --user=${USER_SA}
# kubectl config get-contexts
echo "Congratulations!"
echo "Your kubeconfig file is ${USER}.kubeconfig"
# 添加执行权限
$ chmod +x create-user-kubeconfig.sh
# 脚本 Help
$ ./create-user-kubeconfig.sh --help
USAGE: create-user.sh <api_server> <username> <clusterrole authorization>
Example: https://lb.ypvip.com.cn:6443 brand
# 创建一个 admin 管理员用户，绑定 cluster-admin 权限
$ ./create-user-kubeconfig.sh https://lb.ypvip.com.cn:6443 admin cluster-admin
# 查看 admin 用户 Token
$ kubectl describe secrets -n default `kubectl get secrets -n default | grep admin-token | awk ‘{print $1}‘` | grep ‘token:‘
# 把上面查看的 Token 写入到脚本生成 admin.kubeconfig 文件最底部
$ vim admin.kubeconfig
# 创建 .kube 目录
$ mkdir ~/.kube/
# 拷贝到 .kube 目录下
$ cp admin.kubeconfig ~/.kube/config
# 把kubectl 从 1.17.5 换成 1.18.2版本，可以正常查看集群状态
$ mv /opt/kubernetes/bin/kubectl-1.18.2 /opt/kubernetes/bin/kubectl
$ chmod +x /opt/kubernetes/bin/kubectl
$ kubectl get cs
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health":"true"}
etcd-1 Healthy {"health":"true"}
etcd-2 Healthy {"health":"true"}
登陆到 k8s-master1 操作
创建 Node节点 授权用户 kubelet-bootstrap
$ kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap
创建自动批准相关 CSR 请求的 ClusterRole
# 创建证书旋转配置存放目录 $ mkdir ~/yaml/kubelet-certificate-rotating $ cd ~/yaml/kubelet-certificate-rotating
$ vim tls-instructs-csr.yaml
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: system:certificates.k8s.io:certificatesigningrequests:selfnodeserver
rules:
- apiGroups: ["certificates.k8s.io"]
resources: ["certificatesigningrequests/selfnodeserver"]
verbs: ["create"]
# 部署
$ kubectl apply -f tls-instructs-csr.yaml
自动批准 kubelet-bootstrap 用户 TLS bootstrapping 首次申请证书的 CSR 请求
$ kubectl create clusterrolebinding node-client-auto-approve-csr --clusterrole=system:certificates.k8s.io:certificatesigningrequests:nodeclient --user=kubelet-bootstrap
自动批准 system:nodes 组用户更新 kubelet 自身与 apiserver 通讯证书的 CSR 请求
$ kubectl create clusterrolebinding node-client-auto-renew-crt --clusterrole=system:certificates.k8s.io:certificatesigningrequests:selfnodeclient --group=system:nodes
自动批准 system:nodes 组用户更新 kubelet 10250 api 端口证书的 CSR 请求
$ kubectl create clusterrolebinding node-server-auto-renew-crt --clusterrole=system:certificates.k8s.io:certificatesigningrequests:selfnodeserver --group=system:nodes
首先我们先了解下 kubelet 中 kubelet.kubeconfig 配置是如何生成？
kubelet.kubeconfig 配置是通过 TLS Bootstrapping 机制生成，下面是生成的流程图。
登陆到 k8s-master1 k8s-master2 k8s-master3 操作
# 创建 node 节点生成配置脚本目录
$ mkdir /data/k8s-node
登陆到 k8s-master1 操作
# 创建生成 kubelet 配置脚本
$ vim kubelet.sh
#!/bin/bash
DNS_SERVER_IP=${1:-"10.10.0.2"}
HOSTNAME=${2:-"`hostname`"}
CLUETERDOMAIN=${3:-"cluster.local"}
cat <<EOF >/opt/kubernetes/cfg/kubelet.conf
KUBELET_OPTS="--logtostderr=true \--v=2 \--hostname-override=${HOSTNAME} \--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \--config=/opt/kubernetes/cfg/kubelet-config.yml \--cert-dir=/opt/kubernetes/ssl \--network-plugin=cni \--cni-conf-dir=/etc/cni/net.d \--cni-bin-dir=/opt/cni/bin \--pod-infra-container-image=yangpeng2468/google_containers-pause-amd64:3.2"
EOF
cat <<EOF >/opt/kubernetes/cfg/kubelet-config.yml
kind: KubeletConfiguration # 使用对象
apiVersion: kubelet.config.k8s.io/v1beta1 # api版本
address: 0.0.0.0 # 监听地址
port: 10250 # 当前kubelet的端口
readOnlyPort: 10255 # kubelet暴露的端口
cgroupDriver: cgroupfs # 驱动，要于docker info显示的驱动一致
clusterDNS:
- ${DNS_SERVER_IP}
clusterDomain: ${CLUETERDOMAIN} # 集群域
failSwapOn: false # 关闭swap
# 身份验证
authentication:
anonymous:
enabled: false
webhook:
cacheTTL: 2m0s
enabled: true
x509:
clientCAFile: /opt/kubernetes/ssl/ca.pem
# 授权
authorization:
mode: Webhook
webhook:
cacheAuthorizedTTL: 5m0s
cacheUnauthorizedTTL: 30s
# Node 资源保留
evictionHard:
imagefs.available: 15%
memory.available: 1G
nodefs.available: 10%
nodefs.inodesFree: 5%
evictionPressureTransitionPeriod: 5m0s
# 镜像删除策略
imageGCHighThresholdPercent: 85
imageGCLowThresholdPercent: 80
imageMinimumGCAge: 2m0s
# 旋转证书
rotateCertificates: true # 旋转kubelet client 证书
featureGates:
RotateKubeletServerCertificate: true
RotateKubeletClientCertificate: true
maxOpenFiles: 1000000
maxPods: 110
EOF
cat <<EOF >/usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service
[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kubelet.conf
ExecStart=/opt/kubernetes/bin/kubelet \$KUBELET_OPTS
Restart=on-failure
KillMode=process
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable kubelet
systemctl restart kubelet
# 创建生成 kube-proxy 配置脚本
$ vim proxy.sh
#!/bin/bash
HOSTNAME=${1:-"`hostname`"}
cat <<EOF >/opt/kubernetes/cfg/kube-proxy.conf
KUBE_PROXY_OPTS="--logtostderr=true \--v=2 \--config=/opt/kubernetes/cfg/kube-proxy-config.yml"
EOF
cat <<EOF >/opt/kubernetes/cfg/kube-proxy-config.yml
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
address: 0.0.0.0 # 监听地址
metricsBindAddress: 0.0.0.0:10249 # 监控指标地址,监控获取相关信息 就从这里获取
clientConnection:
kubeconfig: /opt/kubernetes/cfg/kube-proxy.kubeconfig # 读取配置文件
hostnameOverride: ${HOSTNAME} # 注册到k8s的节点名称唯一
clusterCIDR: 10.20.0.0/16 # Pod IP范围
mode: iptables # 使用iptables模式
# 使用 ipvs 模式
#mode: ipvs # ipvs 模式
#ipvs:
# scheduler: "rr"
#iptables:
# masqueradeAll: true
EOF
cat <<EOF >/usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Proxy
After=network.target
[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-proxy.conf
ExecStart=/opt/kubernetes/bin/kube-proxy \$KUBE_PROXY_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable kube-proxy
systemctl restart kube-proxy
# 生成 node 配置文件 $ ./kubelet.sh 10.10.0.2 k8s-master1 cluster.local $ ./proxy.sh k8s-master1 # 查看服务是否启动 $ netstat -ntpl | egrep "kubelet|kube-proxy" # copy kubelet.sh proxy.sh 脚本到 k8s-master2 k8s-master3 机器上 $ scp kubelet.sh proxy.sh root@k8s-master2:/data/k8s-node $ scp kubelet.sh proxy.sh root@k8s-master3:/data/k8s-node
登陆到 k8s-master2 操作
$ cd /data/k8s-node # 生成 node 配置文件 $ ./kubelet.sh 10.10.0.2 k8s-master2 cluster.local $ ./proxy.sh k8s-master2 # 查看服务是否启动 $ netstat -ntpl | egrep "kubelet|kube-proxy"
登陆到 k8s-master3 操作
$ cd /data/k8s-node # 生成 node 配置文件 $ ./kubelet.sh 10.10.0.2 k8s-master3 cluster.local $ ./proxy.sh k8s-master3 # 查看服务是否启动 $ netstat -ntpl | egrep "kubelet|kube-proxy"
# 随便登陆一台master机器查看node节点是否添加成功 $ kubectl get node NAME STATUS ROLES AGE VERSION k8s-master1 NoReady <none> 4d4h v1.18.2 k8s-master2 NoReady <none> 4d4h v1.18.2 k8s-master3 NoReady <none> 4d4h v1.18.2
上面 Node 节点处理 NoReady 状态，是因为目前还没有安装网络组件，下文安装网络组件。
$ vim ~/yaml/apiserver-to-kubelet-rbac.yml
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: kubelet-api-admin
subjects:
- kind: User
name: kubernetes
apiGroup: rbac.authorization.k8s.io
roleRef:
kind: ClusterRole
name: system:kubelet-api-admin
apiGroup: rbac.authorization.k8s.io
# 应用
$ kubectl apply -f ~/yaml/apiserver-to-kubelet-rbac.yml
登陆到 k8s-master1 操作
下载 Calico Version v3.14.0 Yaml 文件
# 存放etcd yaml文件 $ mkdir -p ~/yaml/calico $ cd ~/yaml/calico # 注意：下面是基于自建etcd做为存储的配置文件 $ curl https://docs.projectcalico.org/manifests/calico-etcd.yaml -O
calico-etcd.yaml 需要修改如下配置：
Secret 配置修改
apiVersion: v1 kind: Secret type: Opaque metadata: name: calico-etcd-secrets namespace: kube-system data: etcd-key: (cat /opt/kubernetes/ssl/server-key.pem | base64 -w 0) # 将输出结果填写在这里 etcd-cert: (cat /opt/kubernetes/ssl/server.pem | base64 -w 0) # 将输出结果填写在这里 etcd-ca: (cat /opt/kubernetes/ssl/ca.pem | base64 -w 0) # 将输出结果填写在这里
ConfigMap 配置修改
kind: ConfigMap apiVersion: v1 metadata: name: calico-config namespace: kube-system data: etcd_endpoints: "https://192.168.0.216:2379,https://192.168.0.217:2379,https://192.168.0.218:2379" etcd_ca: "/calico-secrets/etcd-ca" etcd_cert: "/calico-secrets/etcd-cert" etcd_key: "/calico-secrets/etcd-key"
关于ConfigMap部分主要参数如下：
etcd_endpoints：Calico使用etcd来保存网络拓扑和状态，该参数指定etcd的地址，可以使用K8S Master所用的etcd，也可以另外搭建。calico_backend：Calico的后端，默认为bird。cni_network_config：符合CNI规范的网络配置，其中type=calico表示，Kubelet 从 CNI_PATH (默认为/opt/cni/bin)目录找calico的可执行文件，用于容器IP地址的分配。TLS安全认证，则还需要指定相应的ca、cert、key等文件修改 Pods 使用的 IP 网段，默认使用 192.168.0.0/16 网段
- name: CALICO_IPV4POOL_CIDR
value: "10.20.0.0/16"
配置网卡自动发现规则
在 DaemonSet calico-node env 中添加网卡发现规则
# 定义ipv4自动发现网卡规则
- name: IP_AUTODETECTION_METHOD
value: "interface=eth.*"
# 定义ipv6自动发现网卡规则
- name: IP6_AUTODETECTION_METHOD
value: "interface=eth.*"
Calico 模式设置
# Enable IPIP
- name: CALICO_IPV4POOL_IPIP
value: "Always"
Calico 有两种网络模式：BGP 和 IPIP
IPIP 模式时，设置 CALICO_IPV4POOL_IPIP="always"，IPIP 是一种将各Node的路由之间做一个tunnel，再把两个网络连接起来的模式，启用IPIP模式时，Calico将在各Node上创建一个名为 tunl0 的虚拟网络接口。BGP 模式时，设置 CALICO_IPV4POOL_IPIP="off"错误解决方法
错误：[ERROR][8] startup/startup.go 146: failed to query kubeadm‘s config map error=Get https://10.10.0.1:443/api/v1/namespaces/kube-system/configmaps/kubeadm-config?timeout=2s: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
原因：Node工作节点连接不到 apiserver 地址，检查一下calico配置文件，要把apiserver的IP和端口配置上，如果不配置的话，calico默认将设置默认的calico网段和443端口。字段名：KUBERNETES_SERVICE_HOST、KUBERNETES_SERVICE_PORT、KUBERNETES_SERVICE_PORT_HTTPS。
解决方法：
在 DaemonSet calico-node env 中添加环境变量
- name: KUBERNETES_SERVICE_HOST
value: "lb.ypvip.com.cn"
- name: KUBERNETES_SERVICE_PORT
value: "6443"
- name: KUBERNETES_SERVICE_PORT_HTTPS
value: "6443"
修改完 calico-etcd.yaml 后，执行部署
# 部署 $ kubectl apply -f calico-etcd.yaml # 查看 calico pods $ kubectl get pods -n kube-system | grep calico # 查看 node 是否正常，现在 node 服务正常了 $ kubectl get node NAME STATUS ROLES AGE VERSION k8s-master1 Ready <none> 4d4h v1.18.2 k8s-master2 Ready <none> 4d4h v1.18.2 k8s-master3 Ready <none> 4d4h v1.18.2
登陆到 k8s-master1 操作
deploy.sh 是一个便捷的脚本，用于生成coredns yaml 配置。
# 安装依赖 jq 命令 $ yum install jq -y $ cd ~/yaml $ mkdir coredns $ cd coredns # 下载 CoreDNS 项目 $ git clone https://github.com/coredns/deployment.git $ cd coredns/deployment/kubernetes
默认情况下 CLUSTER_DNS_IP 是自动获取kube-dns的集群ip的，但是由于没有部署kube-dns所以只能手动指定一个集群ip。
111 if [[ -z $CLUSTER_DNS_IP ]]; then
112 # Default IP to kube-dns IP
113 # CLUSTER_DNS_IP=$(kubectl get service --namespace kube-system kube-dns -o jsonpath="{.spec.clusterIP}")
114 CLUSTER_DNS_IP=10.10.0.2
# 查看执行效果，并未开始部署 $ ./deploy.sh # 执行部署 $ ./deploy.sh | kubectl apply -f - # 查看 Coredns $ kubectl get svc,pods -n kube-system| grep coredns
测试 Coredns 解析
# 创建一个 busybox Pod
$ vim busybox.yaml
apiVersion: v1
kind: Pod
metadata:
name: busybox
namespace: default
spec:
containers:
- name: busybox
image: busybox:1.28.4
command:
- sleep
- "3600"
imagePullPolicy: IfNotPresent
restartPolicy: Always
# 部署
$ kubectl apply -f busybox.yaml
# 测试解析，下面是解析正常
$ kubectl exec -i busybox -n default nslookup kubernetes
Server: 10.10.0.2
Address 1: 10.10.0.2 kube-dns.kube-system.svc.cluster.local
Name: kubernetes
Address 1: 10.10.0.1 kubernetes.default.svc.cluster.local
登陆到 k8s-master1 操作
$ cd ~/yaml # 拉取 v0.3.6 版本 $ git clone https://github.com/kubernetes-sigs/metrics-server.git -b v0.3.6 $ cd metrics-server/deploy/1.8+
只修改 metrics-server-deployment.yaml 配置文件
# 下面是修改前后比较差异
$ git diff metrics-server-deployment.yaml
diff --git a/deploy/1.8+/metrics-server-deployment.yaml b/deploy/1.8+/metrics-server-deployment.yaml
index 2393e75..2139e4a 100644
--- a/deploy/1.8+/metrics-server-deployment.yaml
+++ b/deploy/1.8+/metrics-server-deployment.yaml
@@ -29,8 +29,19 @@ spec:
emptyDir: {}
containers:
- name: metrics-server
- image: k8s.gcr.io/metrics-server-amd64:v0.3.6
- imagePullPolicy: Always
+ image: yangpeng2468/metrics-server-amd64:v0.3.6
+ imagePullPolicy: IfNotPresent
+ resources:
+ limits:
+ cpu: 400m
+ memory: 1024Mi
+ requests:
+ cpu: 50m
+ memory: 50Mi
+ command:
+ - /metrics-server
+ - --kubelet-insecure-tls
+ - --kubelet-preferred-address-types=InternalIP
volumeMounts:
- name: tmp-dir
mountPath: /tmp
# 部署
$ kubectl apply -f .
# 验证
$ kubectl top node
NAME CPU(cores) CPU% MEMORY(bytes) MEMORY%
k8s-master1 72m 7% 1002Mi 53%
k8s-master2 121m 3% 1852Mi 12%
k8s-master3 300m 3% 1852Mi 20%
# 内存单位 Mi=1024*1024字节 M=1000*1000字节
# CPU单位 1核=1000m 即 250m=1/4核
Kubernetes Dashboard 部署，请参考 K8S Dashboard 2.0 部署并使用 Ingress-Nginx 提供访问入口 文章。
原文：https://www.cnblogs.com/zjz20/p/13201116.html