Kali Linux configuration "Ettercap"

Xx_Instroduction

• Ettercap is a man-in-the-middle attack(MITM) tool,kali take this tool,so,use front we are need configuration that configuration file.
• 

   

   

Ax_Open

• vi /etc/ettercap/etter.conf
• 

   

   

• 1 ############################################################################
  2 ##
  
  3 # ettercap -- etter.conf -- configuration file #
  4 # #
  5 # Copyright (C) ALoR & NaGA #
  6 # #
  7 # This program is free software; you can redistribute it and/or modify #
  8 # it under the terms of the GNU General Public License as published by #
  9 # the Free Software Foundation; either version 2 of the License, or #
  10 # (at your option) any later version. #
  11 # #
  12 # #
  13 ############################################################################
  14
  15 [privs]
  16 ec_uid = 0 #nobody is the default
  17 #haha userid and groupid gaiwei 0
  18 ec_gid = 0 # nobody is the default
  19
  20 [mitm]
  21 arp_storm_delay = 10 # milliseconds
  22 arp_poison_smart = 0 # boolean
  23 arp_poison_warm_up = 1 # seconds
  24 arp_poison_delay = 10 # seconds
  25 arp_poison_icmp = 1 # boolean
  26 arp_poison_reply = 1 # boolean
  27 arp_poison_request = 0 # boolean
  28 arp_poison_equal_mac = 1 # boolean
  29 dhcp_lease_time = 1800 # seconds
  30 port_steal_delay = 10 # seconds
  31 port_steal_send_delay = 2000 # microseconds
  32 ndp_poison_warm_up = 1 # seconds
  33 ndp_poison_delay = 5 # seconds
  34 ndp_poison_send_delay = 1500 # microseconds
  35 ndp_poison_icmp = 1 # boolean
  36 ndp_poison_equal_mac = 1 # boolean
  37 icmp6_probe_delay = 3 # seconds
  38
  39 [connections]
  40 connection_timeout = 300 # seconds
  41 connection_idle = 5 # seconds
  42 connection_buffer = 10000 # bytes
  43 connect_timeout = 5 # seconds
  44
  45 [stats]
  46 sampling_rate = 50 # number of packets
  47
  48 [misc]
  49 close_on_eof = 1 # boolean value
  50 store_profiles = 1 # 0 = disabled; 1 = all; 2 = local; 3 = remote
  51 aggressive_dissectors = 1 # boolean value
  52 skip_forwarded_pcks = 1 # boolean value
  53 checksum_check = 0 # boolean value
  54 submit_fingerprint = 0 # boolean valid (set if you want ettercap to submit unknown finger prints)
  55 checksum_warning = 0 # boolean value (valid only if checksum_check is 1)
  56 sniffing_at_startup = 1 # boolean value
  57
  58 ############################################################################
  59 #
  60 # You can specify what DISSECTORS are to be enabled or not...
  61 #
  62 # e.g.: ftp = 21 enabled on port 21 (tcp is implicit)
  63 # ftp = 2345 enabled on non standard port
  64 # ftp = 21,453 enabled on port 21 and 453
  65 # ftp = 0 disabled
  66 #
  67 # NOTE: some dissectors have multiple default ports, if you specify a new
  68 # one, all the default ports will be overwritten
  69 #
  70 #
  71
  72 #dissector default port
  73
  74 [dissectors]
  75 ftp = 21 # tcp 21
  76 ssh = 22 # tcp 22
  77 telnet = 23 # tcp 23
  78 smtp = 25 # tcp 25
  79 dns = 53 # udp 53
  80 dhcp = 67 # udp 68
  81 http = 80 # tcp 80
  82 ospf = 89 # ip 89 (IPPROTO 0x59)
  83 pop3 = 110 # tcp 110
  84 #portmap = 111 # tcp / udp
  85 vrrp = 112 # ip 112 (IPPROTO 0x70)
  86 nntp = 119 # tcp 119
  87 smb = 139,445 # tcp 139 445
  88 imap = 143,220 # tcp 143 220
  89 snmp = 161 # udp 161
  90 bgp = 179 # tcp 179
  91 ldap = 389 # tcp 389
  92 https = 443 # tcp 443
  93 ssmtp = 465 # tcp 465
  94 rlogin = 512,513 # tcp 512 513
  95 rip = 520 # udp 520
  96 nntps = 563 # tcp 563
  97 ldaps = 636 # tcp 636
  98 telnets = 992 # tcp 992
  99 imaps = 993 # tcp 993
  100 ircs = 994 # tcp 993
  101 pop3s = 995 # tcp 995
  102 socks = 1080 # tcp 1080
  103 radius = 1645,1646 # udp 1645 1646
  104 msn = 1863 # tcp 1863
  105 cvs = 2401 # tcp 2401
  106 mysql = 3306 # tcp 3306
  107 icq = 5190 # tcp 5190
  108 ymsg = 5050 # tcp 5050
  109 mdns = 5353 # udp 5353
  110 vnc = 5900,5901,5902,5903 # tcp 5900 5901 5902 5903
  111 x11 = 6000,6001,6002,6003 # tcp 6000 6001 6002 6003
  112 irc = 6666,6667,6668,6669 # tcp 6666 6667 6668 6669
  113 gg = 8074 # tcp 8074
  114 proxy = 8080 # tcp 8080
  115 rcon = 27015,27960 # udp 27015 27960
  116 ppp = 34827 # special case ;) this is the Net Layer code
  117 TN3270 = 23,992 # tcp 23 992
  118
  119 #
  120 # you can change the colors of the curses GUI.
  121 # here is a list of values:
  122 # 0 Black 4 Blue
  123 # 1 Red 5 Magenta
  124 # 2 Green 6 Cyan
  125 # 3 Yellow 7 White
  126 #
  127 [curses]
  128 color_bg = 0
  129 color_fg = 7
  130 color_join1 = 2
  131 color_join2 = 4
  132 color_border = 7
  133 color_title = 3
  134 color_focus = 6
  135 color_menu_bg = 4
  136 color_menu_fg = 6
  137 color_window_bg = 4
  138 color_window_fg = 7
  139 color_selection_bg = 6
  140 color_selection_fg = 6
  141 color_error_bg = 1
  142 color_error_fg = 3
  143 color_error_border = 3
  144
  145 #
  146 # This section includes all the configurations that needs a string as a
  147 # parmeter such as the redirect command for SSL mitm attack.
  148 #
  149 [strings]
  150
  151 # the default encoding to be used for the UTF-8 visualization
  152 utf8_encoding = "ISO-8859-1"
  153
  154 # the command used by the remote_browser plugin
  155 remote_browser = "xdg-open http://%host%url"
  156
  157
  158 #####################################
  159 # redir_command_on/off
  160 #####################################
  161 # you must provide a valid script for your operating system in order to have
  162 # the SSL dissection available
  163 # note that the cleanup script is executed without enough privileges (because
  164 # they are dropped on startup). so you have to either: provide a setuid program
  165 # or set the ec_uid to 0, in order to be sure the cleanup script will be
  166 # executed properly
  167 # NOTE: the script must fit into one line with a maximum of 255 characters
  168
  169 #---------------
  170 # Linux
  171 #---------------
  172
  173 # if you use ipchains:
  174 #redir_command_on = "ipchains -A input -i %iface -p tcp -s 0/0 -d 0/0 %port -j REDIRECT %rport"
  175 #redir_command_off = "ipchains -D input -i %iface -p tcp -s 0/0 -d 0/0 %port -j REDIRECT %rport"
  176
  177 # if you use iptables:
  178 redir_command_on = "iptables -t nat -A PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"
  179 redir_command_off = "iptables -t nat -D PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"
  180
  181 #---------------
  182 # Mac Os X
  183 #---------------
  184
  185 # quick and dirty way:
  186 #redir_command_on = "ipfw -q add set %set fwd 127.0.0.1,%rport tcp from any to any %port in via %iface"
  187 #redir_command_off = "ipfw -q delete set %set"
  188
  189 # a better solution is to use a script that keeps track of the rules interted
  190 # and then deletes them on exit:
  191
  192 # redir_command_on:
  193 # ----- cut here -------
  194 # #!/bin/sh
  195 # if [ -a "/tmp/osx_ipfw_rules" ]; then
  196 # ipfw -q add head -n 1 osx_ipfw_rules fwd 127.0.0.1,1 tcp from any to any2 in via 3 197 # else 198 # ipfw add fwd 127.0.0.1,1 tcp from any to any 2 in via3 | cut -d " " -f 1 >> /tmp/osx_ipfw_rules
  199 # fi
  200 # ----- cut here -------
  201
  202 # redir_command_off:
  203 # ----- cut here -------
  204 # #!/bin/sh
  205 # if [ -a "/tmp/osx_ipfw_rules" ]; then
  206 # ipfw -q delete head -n 1 /tmp/osx_ipfw_rules
  207 # rm -f /tmp/osx_ipfw_rules
  208 # fi
  209 # ----- cut here -------
  210
  211 #---------------
  212 # FreeBSD
  213 #---------------
  214
  215 # Before OF can be used, make sure the kernel module has been loaded by
  216 # kldstat | grep pf.ko. If the rusult is empty, you can load it by
  217 # kldload pf.ko or add ‘pf_enable="YES"‘ to the /etc/rc.conf and reboot.
  218
  219 # Check if the PF status is enabled by
  220 # pfctl -si | grep Status | awk ‘{print $2;}‘. If "Disabled", enable it with
  221 # pfctl -e.
  222
  223 #redir_command_on = "(pfctl -sn 2> /dev/null; echo ‘rdr pass on %iface inet proto tcp from any to any port %port -> localhost port %rport‘) | pfctl -f - 2> /dev/null"
  224 #redir_command_off = "pfctl -Psn 2> /dev/null | grep -v %port | pfctl -f - 2> /dev/null"
  225
  226
  227 #---------------
  228 # Open BSD
  229 #---------------
  230
  231 # unfortunately the pfctl command does not accepts direct rules adding
  232 # you have to use a script which executed the following command:
  233
  234 # ----- cut here -------
  235 # #!/bin/sh
  236 # rdr pass on 1 inet proto tcp from any to any port2 -> localhost port $3 | pfctl -a sslsniff -f -
  237 # ----- cut here -------
  238
  239 # it‘s important to remember that you need "rdr-anchor sslsniff" in your
  240 # pf.conf in the TRANSLATION section.
  241
  242 #redir_command_on = "the_script_described_above %iface %port %rport"
  243 #redir_command_off = "pfctl -a sslsniff -Fn"
  244
  245 # also, if you create a group called "pfusers" and have EC_GID be that group,
  246 # you can do something like:
  247 # chgrp pfusers /dev/pf
  248 # chmod g+rw /dev/pf
  249 # such that all users in "pfusers" can run pfctl commands; thus allowing non-root
  250 # execution of redir commands.
  251
  252
  253 ##########
  254 # EOF #
  255 ##########</pre>
  

  　　

Bx_Modificati

• Line 16 and line 18 will userid and groupid value instead 0
• 
• Line 178 and line 179 do away with "#" ,in this way can pass iptables firewall function transmit part flow.
• 

•  

  save,close,and ok 

Kali Linux configuration "Ettercap"

原文：https://www.cnblogs.com/enomothem/p/11628569.html