首页 > 其他 > 详细

Land Rover Aurora 2014 airbag repair using CG100 Pro III

时间:2019-06-16 13:17:26      阅读:154      评论:0      收藏:0      [点我收藏+]

2014 Land Rover Aurora with airbag NO. DK62-14D374-AG, use CG100 PROG III to repair the airbag without any problem.

Car type: 2014 Land Rover Aurora
Airbag No: DK62-14D374-AG

CG100 Pro III repair airbag on Land Rover Aurora 2014:

1.Check the vehicle.
技术分享图片
技术分享图片
2.The airbag lights on all the time.

3.Access professional decoder detection and clear the DTC.
技术分享图片

4.Disassemble the car, find the airbag computer board, confirm the chip.

技术分享图片

技术分享图片

5.Open the software, enter the corresponding operation interface, find the physical wiring diagram.

技术分享图片

技术分享图片

技术分享图片

技术分享图片

6.Perform physical wiring in a no-current environment and confirm that it is correct before

powering on. After reading the data, please save the original data! If the software supports

automatic repair, please repair it at the prompt of the software; if the software does not support

repair temporarily, please select the custom operation the first time consult the manufacturer’s

technical staff ( E-Mail: Sales@obd2tool.com).

技术分享图片

技术分享图片

技术分享图片

(Note: Please do not touch any cable when it is reading.)

技术分享图片

技术分享图片

技术分享图片

技术分享图片

技术分享图片

7.After the repair succeed, please put the airbag computer board back to the car. Connect Land Rover special inspection SDD detection, it did not show any DTC.

技术分享图片

8.The airbag light is off.

技术分享图片

9.The airbag repaired successfully by CG100 Programmer.

Land Rover Aurora 2014 airbag repair using CG100 Pro III

原文:https://www.cnblogs.com/obd2tool/p/11030246.html

(0)
(0)
   
举报
评论 一句话评论(0
关于我们 - 联系我们 - 留言反馈 - 联系我们:wmxa8@hotmail.com
© 2014 bubuko.com 版权所有
打开技术之扣,分享程序人生!