首页 > 其他 > 详细

UP400 Programmer User Manual: Read/Write Data with OtoSys IM600

时间:2018-10-08 15:47:49      阅读:49      评论:0      收藏:0      [点我收藏+]

标签:AURO IM600   auro im600 key programmer   AURO OtoSys IM600   UP400 Programmer      

UP400 Programmer User Manual for newbies:

What is UP400 Programmer

What is UP400 Programmer used for

What eeprom transponder can be R/W

UP400 Programmer test report

In detail...

What is UP400 Programmer:

The UP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs.

By working with diagnostic tool and PC that are both loaded with programmer software, the UP400 can read/write transponder data quickly and accurately.

Source: http://www.chinacardiags.com/

What is UP400 Programmer used for:

  1. DC Port – provides 12V DC power supply.
  2. USB Port – provides data communication and 5V DC power supply.
  3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable,

vehicle key cable, ECU cable, MCU cable, MC9S12 cable.

  1. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY

signal interface.

  1. IC Card Induction Area
  2. Vehicle Key Slot – holds the vehicle key.
  3. Transponder Slot – holds the transponder.
  4. Remote Control Transponder Induction Area
  5. Mercedes Infrared Key Slot – holds the Mercedes infrared key.
  6. Status LED – indicates the current operating status.
  7. Locker – locks the EEPROM component transponder slot to ensure

proper functioning.

  1. EEPROM Component Transponder Slot – holds the EEPROM plug-in

transponder or EEPROM socket.

DC Port

DC Port is used to provide 12 V power supply for the UP400.

USB Port

The Type B USB port provides data communication and power supply for

handheld device, PC and UP400.

DB 26-Pin Port

Five components can be connected to this port: Mercedes Infrared Cable,

APA102 – Remote Match Cable (optional), APA104 – ECU Cable, APA105

– MCU Cable and APA106 – MC9S12 Cable.

  1. APA102 – Remote Match Cable (optional)

  1. APA104 – ECU Cable

  1. APA105 – MCU Cable

  1. APA106 – MC9S12 Cable

Cross-shaped Signal Pin

The Cross-shaped signal pin is used to place MCU board, MCU spare cable or DIY signal cable to read or write MCU and ECU chips.

IC Card Induction Area

It is used to read and write IC card information.

Vehicle Key Slot

It is used to hold the vehicle key to read or write vehicle key information.

Transponder Slot

It is used to hold the transponder to read or write transponder information.

Remote Control Transponder Induction Area

It is used to read and write remote control transponder information.

Mercedes Infrared Key Slot

It is used to hold Mercedes infrared key to read or write Mercedes vehicle key information.

Status LED

The Status Indicator shows the current operating status of the UP400. See the table below for detailed description.

Locker

It is used to place EEPROM chip or socket to read or write EEPROM

information.

What chips UP400 can read and write:

EEPROM Component Transponder Slot

It is used to hold the EEPROM plug-in transponder or EEPROM socket.

EEPROM Read/Write Transponder Coverage:


Chip Type Name Chip Type Name

ATMEL AT24C01 ATMEL AT24C1024

ATMEL AT24C02 ATMEL AT24C128_1.8

ATMEL AT24C04 ATMEL AT24C256_1.8

ATMEL AT24C08 ATMEL AT24C512_1.8

ATMEL AT24C16 ATMEL AT24C01A

ATMEL AT24C32 ST ST24x01/ST25x01

ATMEL AT24C64 ST ST24x02/ST25x02

ATMEL AT24C128 ST ST24x04/ST25x04

ATMEL AT24C256 ST ST24x08/ST25x08

ATMEL AT24C512 ST ST24x16/ST25x16

ST M24C01 ATMEL AT25640

ST M24C02 ATMEL AT25128

ST M24C04 ATMEL AT25256

ST M24C08 ATMEL AT25512

ST M24C16 ATMEL AT25010_1.8

ST M24C32 ATMEL AT25020_1.8

ST M24C64 ATMEL AT25040_1.8

FAIRCHILD NM24C16U ATMEL AT25080_1.8

FAIRCHILD NM24C16UT ATMEL AT25160_1.8

FAIRCHILD NM24C17U ATMEL AT25320_1.8

FAIRCHILD NM24C17UT ATMEL AT25640_1.8

MICROCHIP 85C72 ATMEL AT25128_1.8

MICROCHIP 85C82 ATMEL AT25256_1.8

MICROCHIP 85C92 ST M95010

NXP PCF8582C ST M95020

NXP PCF8594C ST M95040

NXP PCF8598C ST M95080

ATMEL AT25010 ST M95160

ATMEL AT25020 ST M95320

ATMEL AT25040 ST M95640

ATMEL AT25080 ST M95128

ATMEL AT25160 ST M95256

ATMEL AT25320 ST M95512

MICROCHIP 25xx040 NATIONAL NM93C13

MICROCHIP 25xx080 NATIONAL NM93C14

MICROCHIP 25xx160 NATIONAL NM93C14TM8

MICROCHIP 25xx320 MICROCHIP 93C46X

MICROCHIP 25xx640 MICROCHIP 93C46A

MICROCHIP

25xx040_TSS

OP

MICROCHIP 93C46

MICROCHIP

25xx320_TSS

OP

MICROCHIP 93C46AX

MICROCHIP

25xx640_TSS

OP

MICROCHIP

93C46BX_93C46

CX

CATALYST CAT25C01 MICROCHIP 93C56A

CATALYST CAT25C02 MICROCHIP 93C56

CATALYST CAT25C04 MICROCHIP 93C66A

CATALYST CAT25C08 MICROCHIP 93C66

CATALYST CAT25C16 MICROCHIP 93C76A

CATALYST CAT25C32 MICROCHIP 93C76

CATALYST CAT25C64 MICROCHIP 93C86A

CATALYST CAT25C128 MICROCHIP 93C86

CATALYST CAT25C256 ATMEL AT93C46A

ST M35080 ATMEL AT93C46

XICOR X5043 ATMEL AT93C46R

XICOR X5045 ATMEL AT93C56

XICOR X25043 ATMEL AT93C57

XICOR X25045 ATMEL AT93C66

MICROCHIP 93C06 ATMEL AT93C76

ATMEL AT93C86 SONY CXK1011

NATIONAL NM93CS06 SONY CXK1012

NATIONAL NM93CS46 SONY CXK1013

NATIONAL NM93CS56 Seiko S_24H30

NATIONAL NM93CS66 Seiko S_24H30_SOP8

FAIRCHILD FM93CS46T Seiko S_24H45

ST M93C46 Seiko S_24H45_SOP8

ST M93C56 Seiko S_24S30

ST M93C66 Seiko S_24S45

ST M93C76 TOSHIBA TC89101

ST M93C86 TOSHIBA TC89102

ST M93S46 TOSHIBA TC89121

ST M93S56 TOSHIBA TC89122

ST M93S66 Xicor X24C44

ATMEL AT59C11 TMC TMC93LC56

ATMEL AT59C22 TMC TMC93LC57

ATMEL AT59C13 TMC TMC93LC66

OKI MSM16911 TMC TMC93LC86

TMC TMC93LC46


Chip Type Name

FREESCALE MC9S12DG128

FREESCALE MC9S12DJ64

FREESCALE MC9S12DG256

FREESCALE MC9S12DT128

FREESCALE MC9S12DT256

FREESCALE MC9S12XDP512

FREESCALE MC9S12XET512

FREESCALE MC68HC08AZ60

FREESCALE MC68HC(9)08AB16A

FREESCALE MC68HC908GR16A

FREESCALE MC68HC(7)05X32

FREESCALE MC68HC705E6

FREESCALE MC68HC11E9

INFINEON SAK-TC1766

INFINEON SAK-TC1793

INFINEON SAK-TC1796

INFINEON SAK-TC1797


UP400 Programmer Test Report:

Check lock status success!

Tech support from https://www.facebook.com/groups/1642064505830743/


http://www.chinacardiags.com/


UP400 Programmer User Manual: Read/Write Data with OtoSys IM600

标签:AURO IM600   auro im600 key programmer   AURO OtoSys IM600   UP400 Programmer      

(0)
(0)
   
举报
评论 一句话评论(0
0条  
登录后才能评论!
multidigagj2534
加入时间:2016-12-13
  关注此人  发短消息
multidigagj2534”关注的人------(0
multidigagj2534”的粉丝们------(0
© 2014 bubuko.com 版权所有 鲁ICP备09046678号-4
打开技术之扣,分享程序人生!
             

鲁公网安备 37021202000002号