首页 > 其他 > 详细

Centos7 / RHEL 7 双网卡绑定

时间:2017-10-17 22:36:34      阅读:520      评论:0      收藏:0      [点我收藏+]

http://www.cnblogs.com/hukey/p/6224969.html

1. 简要
    双网卡绑定技术在centos7中使用了teaming技术,而在rhel6/centos7中使用的是bonding技术,
    在centos7中双网卡绑定既能使用teaming也可以使用bonding,这里推荐使用teaming技术,方便与查看和监控。

2. 原理
    这里介绍两种最常见的双网卡绑定模式:
        (1) roundrobin - 轮询模式
            所有链路处于负载均衡状态,这种模式的特点增加了带宽,同时支持容错能力。
        (2) activebackup - 主备模式
            一个网卡处于活动状态,另一个处于备份状态,所有流量都在主链路上处理,当活动网卡down掉时,启用备份网卡。

3. 基础环境
    系统:centos7

    在centos7中,关闭虚拟机添加网卡,再开启虚拟机,系统是不会自动生成网卡的配置文件:
技术分享
    在centos7中要生成网卡配置文件的方法很简单,使用如下命令:

技术分享
    # 查看物理网卡信息
[root@localhost ~]# nmcli dev
DEVICE       TYPE      STATE      CONNECTION         
eno16777736  ethernet  connected  eno16777736        
eno33554984  ethernet  connected  Wired connection 1 
eno50332208  ethernet  connected  Wired connection 2 
lo           loopback  unmanaged  --
技术分享

上面的信息可以看到,一共有四张网卡,其中lo是本地回环网卡,另外三张为物理网卡。

技术分享
    # 查看网卡连接信息
[root@localhost ~]# nmcli con sh
NAME                UUID                                  TYPE            DEVICE      
Wired connection 2  9a1314bf-d273-406a-930a-dc4160dee4ec  802-3-ethernet  eno50332208 
Wired connection 1  47eef4a3-7fa4-4a73-83ef-1485bda9b950  802-3-ethernet  eno33554984 
eno16777736         51d00668-2cf5-41da-ad8d-5019d62e98ad  802-3-ethernet  eno16777736
技术分享

上面的信息可以查看到一共有3个连接,其中两个有线连接,表示没有设置过的网卡连接,还有一个enoxx连接。接下来要修改两个有线连接的命名方法,并生成网卡配置文件:

    # 首先,删除两个无用的有线连接
[root@localhost ~]# nmcli con del 9a1314bf-d273-406a-930a-dc4160dee4ec
Connection ‘Wired connection 2‘ (9a1314bf-d273-406a-930a-dc4160dee4ec) successfully deleted.
[root@localhost ~]# nmcli con del 47eef4a3-7fa4-4a73-83ef-1485bda9b950
Connection ‘Wired connection 1‘ (47eef4a3-7fa4-4a73-83ef-1485bda9b950) successfully deleted.
网络连接和配置文件都成功生成了。 接下来通过eno33554984 和 eno50332208 使用teaming模式进行双网卡绑定

4. roundrobin模式:

    roundrobin模式也称为轮询模式,它 基于每一个包 ,当某一台服务器的两张网卡设置为roundrobin模式teaming,此时服务器发出的数据包,就会在两个物理
    网卡上进行轮询,即第一个数据包走一张网卡,第二个数据包走第二张网卡,依次轮询。
    注意:
        (1)roundrobin具有容错性,当一张网卡down掉,数据包依然发送成功。
        (2)在使用roundrobin模式必须要在交换机上做以太通道,不然会出现网络无法连通。

    实际操作:

    # 使用nmcli命令操作,创建team接口team0,同时设置teaming模式为roundrobin
[root@localhost ~]# nmcli con add type team con-name team0 ifname team0 config ‘{"runner":{"name": "roundrobin"}}‘
Connection ‘team0‘ (9dc48bd6-54b9-48db-b7dd-ecf34ae9196f) successfully added.
    # 给接口team0设置ip地址
[root@localhost ~]# nmcli con modify team0 ipv4.address ‘10.0.0.2/24‘ ipv4.gateway ‘10.0.0.1‘ 
    # 设置为手动模式,取消DHCP
[root@localhost ~]# nmcli con modify team0 ipv4.method manual
技术分享
    # 将两张物理网卡加入到team中
[root@localhost ~]# nmcli con add type team-slave con-name team0-port1 ifname eno33554984 master team0
Connection ‘team0-port1‘ (22d3640e-f5c8-499c-b0dd-913c8970d800) successfully added.
[root@localhost ~]# nmcli con add type team-slave con-name team0-port2 ifname eno50332208 master team0
Connection ‘team0-port2‘ (12660d2a-0e1f-41e6-96b2-53de4fc6b78c) successfully added.
[root@localhost ~]# nmcli con sh
NAME         UUID                                  TYPE            DEVICE      
team0-port2  12660d2a-0e1f-41e6-96b2-53de4fc6b78c  802-3-ethernet  --          
eno16777736  51d00668-2cf5-41da-ad8d-5019d62e98ad  802-3-ethernet  eno16777736 
team0-port1  22d3640e-f5c8-499c-b0dd-913c8970d800  802-3-ethernet  --          
team0        9dc48bd6-54b9-48db-b7dd-ecf34ae9196f  team            team0       
eno33554984  32d2389e-4e82-4419-9d18-5aff8f0be003  802-3-ethernet  eno33554984 
eno50332208  eea2a115-63f8-4f33-be84-12559f02542c  802-3-ethernet  eno50332208
技术分享

现在成功将两张物理网卡绑定到了team组中

技术分享
    # 现在查看team0的状态就出现了,模式是:roundrobin
[root@localhost ~]# teamdctl team0 st 
setup:
  runner: roundrobin
ports:
  eno33554984
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
  eno50332208
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
技术分享

这样,team模式的roundrobin搭建成功。

总结:
    在做链路聚合的时候,所要使用到的物理网卡不能独立存在连接,也就是在nmcli con sh查看时,不能独立存在,否则就无法绑定到team模式中。

4.1 测试

因为这里是虚拟机环境,只能通过down掉网卡进行查看。

技术分享
[root@localhost ~]# teamdctl team0 st
setup:
  runner: roundrobin
ports:
  eno33554984
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
  eno50332208
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
技术分享

两张网卡同时在线,现在down掉其中一张网卡,

技术分享
[root@localhost ~]# nmcli con del team0-port1
Connection ‘team0-port1‘ (0331ea43-95c0-4106-b388-8484d4c3940d) successfully deleted.
[root@localhost ~]# nmcli con sh
NAME         UUID                                  TYPE            DEVICE      
eno16777736  51d00668-2cf5-41da-ad8d-5019d62e98ad  802-3-ethernet  eno16777736 
team0        9dc48bd6-54b9-48db-b7dd-ecf34ae9196f  team            team0       
team0-port2  880f2146-fe93-42dd-8d28-7d0dd50b4011  802-3-ethernet  eno50332208

[root@localhost ~]# teamdctl team0 st
setup:
  runner: roundrobin
ports:
  eno50332208
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
技术分享

这样就发现eno33554984网卡已经down掉了。

技术分享
[root@localhost ~]# nmcli con add type team-slave con-name team0-port1 ifname eno33554984 master team0
Connection ‘team0-port1‘ (59acd6bf-affc-4994-a050-83c45816859a) successfully added.
[root@localhost ~]# 
[root@localhost ~]# teamdctl team0 st
setup:
  runner: roundrobin
ports:
  eno33554984
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
  eno50332208
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
技术分享

    虚拟机环境就这样测试了吧,至于生产环境就直接拔网线,ping测试。

资料有说linux下roundrobin具有容错的效果,为了测试是否有容错的效果,虚拟机做了下更改来验证:

技术分享

这一次网卡全部改成桥接模式,为了更好的测试是否具有容错性。

技术分享

roundrobin已经配置完毕。接下来我们down掉一张网卡检查是否具有容错性。

技术分享

通过虚拟机测试,容错性是存在的。

 

5. 双网卡绑定activebackup的实现

技术分享
[root@localhost ~]# nmcli con sh 
NAME         UUID                                  TYPE            DEVICE      
team0-port2  2a1aa534-e021-4452-bb0a-2002dabcbc08  802-3-ethernet  eno50332208 
team0-port1  9a10c9ef-ee9c-4151-9a47-59b4668e8934  802-3-ethernet  --          
eno16777736  51d00668-2cf5-41da-ad8d-5019d62e98ad  802-3-ethernet  eno16777736 
team0        c2278f3f-5c6b-4e1d-b925-514d3c3832b6  team            team0       
[root@localhost ~]# nmcli con del team0 team0-port1 team0-port2
Connection ‘team0‘ (c2278f3f-5c6b-4e1d-b925-514d3c3832b6) successfully deleted.
Connection ‘team0-port1‘ (9a10c9ef-ee9c-4151-9a47-59b4668e8934) successfully deleted.
Connection ‘team0-port2‘ (2a1aa534-e021-4452-bb0a-2002dabcbc08) successfully deleted.
[root@localhost ~]# nmcli con sh 
NAME         UUID                                  TYPE            DEVICE      
eno16777736  51d00668-2cf5-41da-ad8d-5019d62e98ad  802-3-ethernet  eno16777736

# 以上操作就删除了roundrobin模式,恢复到初始状态。
技术分享
技术分享
# 添加逻辑网卡team0,并启用activebackup模式
[root@localhost ~]# nmcli con add type team con-name team0 ifname team0 config ‘{"runner":{"name":"activebackup"}}‘
Connection ‘team0‘ (f0794e59-419d-4c2a-96b9-464610b6321a) successfully added.

# 绑定ip
[root@localhost ~]# nmcli con modify team0  ipv4.address 192.168.118.122/24 ipv4.gateway 192.168.118.1
[root@localhost ~]# nmcli con modify team0 ipv4.method manual


# 添加物理网卡到activebackup模式
[root@localhost ~]# nmcli con add type team-slave con-name team0-port1 ifname eno33554984 master team0
Connection ‘team0-port1‘ (52656904-6e85-4a04-98b4-2b19773fa290) successfully added.
[root@localhost ~]# nmcli con add type team-slave con-name team0-port2 ifname eno50332208 master team0
Connection ‘team0-port2‘ (44d96e3a-014a-481f-9122-4ca2d3be9f7a) successfully added.
技术分享
技术分享
[root@localhost ~]# teamdctl team0 st
setup:
  runner: activebackup
ports:
  eno33554984
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
  eno50332208
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
runner:
  active port: eno33554984
技术分享

成功,处于活动中的网卡为 eno33554984

5.1 测试

通过down掉活动网卡测试网络是否仍然处于连通状态

技术分享

 

测试成功。
注意: 在做网卡绑定的时候,如果发现物理网卡总是无法绑定到team0,请检查该物理网卡是否处于up状态。

Centos7 / RHEL 7 双网卡绑定

原文:http://www.cnblogs.com/cqubityj/p/7684240.html

(0)
(0)
   
举报
评论 一句话评论(0
关于我们 - 联系我们 - 留言反馈 - 联系我们:wmxa8@hotmail.com
© 2014 bubuko.com 版权所有
打开技术之扣,分享程序人生!