首页 > 其他 > 详细

华为交换机基本命令补完

时间:2015-12-22 19:40:39      阅读:475      评论:0      收藏:0      [点我收藏+]

1、[HUAWEI]command-privilege level 15 view shell reboot  //设置reboot用户最高访问权限

2、[HUAWEI]fixdisk flash     //修复文件系统

3、[HUAWEI]startup system-software file      //设置下次启动的配置

4、[HUAWEI]startup system-software file.cc       //设置下次启动的程序

5、[HUAWEI]schedule reboot at 22:00              //设置当晚22:00重启交换机

6、[HUAWEI]header shell information &12345&(%12345)      //设置会话建立标题(交互方式)

7、[HUAWEI]idle-timeout minutes       //连接超时时间设置

8、[HUAWEI]screen-width  screen-length  //设置当前终端显示列数

9、[HUAWEI]display conunters{inbound|outbound} {interface xxx}       //查看进出流量 

10、[HUAWEI]reset conunters interface xxx   //查看端口流量

11、[HUAWEI]interface eth-thunk trunk-id    //创建eth-thunk口

12、[HUAWEI]stack enable                    //使能堆叠功能

13、[HUAWEI]display   stack                 //查看堆叠情况



华为交换机基本命令补完

原文:http://zgysolution.blog.51cto.com/9605745/1727233

(0)
(0)
   
举报
评论 一句话评论(0
关于我们 - 联系我们 - 留言反馈 - 联系我们:wmxa8@hotmail.com
© 2014 bubuko.com 版权所有
打开技术之扣,分享程序人生!